SAE 2 Pin

American Made Heavy Duty SAE 2 Pin Assembly Variations

by on Feb.05, 2012, under HD Variations

Having taken on making our niche SAE 2 Pin connectors, the idea of developing a wide assortment of heavy duty variations occurred to us.  Not long after developing and manufacturing our initial offering we began addressing heavier AWG assemblies.  In this post, we will discuss the variation stages we have ventured through thus far.

Note:  All of these products are manufactured here in the United States.

The first offering manufactured by us was the assembly below – high quality SAE 2 Pin connector with enhanced strain relief and 11-1/2″ Black of SPT-1 cord with 18 AWG leads.  These proved popular with do-it-yourselfers wiring up light accessory circuits, etc.  Following that came that same SAE 2 Pin connector with 5 feet of Black SPT-1 and 16 AWG leads.







The first of our heavier duty line to be developed and manufactured was SAE 2 Pin pigtail assemblies with 12 AWG leads – 12″ long.








These were welcomed by do-it-yourselfers, as well – especially with solar enthusiasts, amateur radio enthusiasts, and others with a desire for SAE 2 Pin connectors with up-sized leads.

Initially, we manufactured this product with lead insulation colored red and black.  We called the pigtail “Power Side” when the red insulated wire lead to the protected “socket” side of the SAE 2 Pin, and called it a “Load Side” pigtail when the red insulated wire lead to the exposed male pin side of the SAE 2 Pin.

Next to be addressed was SAE 2 Pin pigtail assemblies with 10 AWG leads – 12″ long.








We chose to stick with black insulated/separate 10 AWG cables vs. red/black insulation – thus leaving polarity up to the installer.

Those two variations in hand, we were quick to follow with SAE 2 Pin “whip assemblies” 5 foot long leads in both 12 and 10 AWG.  Again, we choose to stick with black insulated/separate cables vs. red/black insulation.


As you can imagine, applying an SAE 2 Pin connector to the far end was right around the corner.  So, we started cranking out SAE 2 Pin Extensions with black insulated/separate 10 AWG cables – 5, 8, and 10 foot long.



Your email is welcome at:

We invite you to visit our  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

:, , , , , , , , , , , , , , , , ,

Leave a Reply

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...