SAE 2 Pin

Archive for May, 2015

Electronic Coyote Caller w/ SAE 2 Pin

by on May.19, 2015, under Application

Our 1st Electronic Coyote Caller – a Business Project, as well as a Hunting Project prompted by the skyrocketing Coyote population in Georgia which is impacting the survival rate of Young Deer & Turkeys – Big Time !!!

Research online quickly provided guidance on components as well as calling.  Within minutes We had a loudspeaker and amplifier ordered on amazon.com (Radio Shack was recommended, but seems to be tapped out and headed for bankruptcy).

Being Cat Lovers with 3 Rescues, We go through buckets of Kitty Litter. We save the empty litter buckets because We find them very handy & efficient for storage (they’re rectangular, stackable, have lids and a carry handle, etc.).

I was immediately envisioning use of a kitty litter bucket in the assembly of a electronic coyote calling setup.

Coyote Caller Components

Coyote Caller Components

A sealed 12 Volt AGM Battery (We have these on hand for other projects – generally Solar) mounted in the bottom of the bucket would provide weight for stability as well as Power.

Coyote Caller battery mount

Coyote Caller battery mount

A Fused Battery Pigtail with SAE 2 Pin Connector (available from US) will not only provide for access to Power, but for connection to a Battery Tender for recharging as well.

An SAE 2 Pin pigtail with 18 AWG leads (available from US) was installed on the power leads of the amplifier.  The leads on the amplifier are lighter, but this combination lends itself well to ease in coupling & uncoupling, and therefore durability.

Same with the Speaker connection wiring – installed using an SAE 2 Pin Junction with 18 AWG leads.  This facilitates easy disconnection for disassembly.

Part of the Beauty of the Bucket is that it not only facilitates assembly and protects the components – out of sight, but keeps all the wiring & connections contained.

The amplifier was mounted on the underside of the “trap door” lid to facilitate easy access to volume control during operation.

Electronic Coyote Caller Assembled with iPod

Electronic Coyote Caller Assembled with iPod

The bucket was camouflaged with spray paint using leaves & pine boughs for pattern.

Our Parts List:

(1) Pyle PHSP4 Indoor/Outdoor 6″ PA Horn Speaker – 50W

(1) Pyle PLIPA2 Mini Amplifier (w/ iPod connection)

(1) 12 Volt AGM Battery

(1) Fused Battery Pigtail w/ SAE 2 Pin Connector

(3) SAE 2 Pin 18 AWG pigtails + 1/8″ heat shrink tubing & solder (for power & speaker wiring)

(1) Kitty Litter bucket with “trap door” top

(6) Fastener Assy’s for Speaker

(4) Fastener Assy’s for Amplifier

(1) Green, (1) Brown, (1) Gray, (1) Black spray paint (to facilitate camouflage painting using tree limbs, pine boughs, etc.)

*Note: SAE 2 Pin Connectors are also referred to as 2-prong, 2-pole, 2-way, and flat trailer plugs.  They are often found in the battery maintenance industry (for example: on the output of a battery tender) and in the portable solar charger industry.  A basic version is commonly available from Hopkins Manufacturing as P/N 47965 as they are used in the trailer industry.

We endeavor to bring High Quality Made in the USA SAE 2 Pin Connector Assembly Configurations to the Marketplace.

To view our full Product Line – Please visit our Solar Capitalist LLC ecommerce store at: www.solarcapitalist.com

For Commercial Quantity purchases – Please Call Us at 302-562-1706 or email Us at: solaray@solarcapitalist.com

Leave a Comment :, , , , , , , more...

SAE 2 Pin Max Strain Relief & Grip

by on May.13, 2015, under Configurations, HD Variations, USA #1

SAE 2 Pin Max Strain Relief Grip

SAE 2 Pin Max Strain Relief Grip

News Flash: We’ve responded to Customer Feedback with the above SAE 2 Pin Configuration featuring enhanced Strain Relief and Grip.

We often hear customers lament with respect to the impact of frequent manipulation of the economical mass produced SAE 2 Pin connectors available in discount automotive stores.  Specifically, trouble coupling & uncoupling connectors, and conductors breaking within the insulation at the back end of the connector.  Clearly, these connector configurations are not designed with ease in coupling & uncoupling in mind.

In Answer to the Desires of Our Customers, We have Produced the above Enhanced Configuration featuring Max Strain Relief & Grip.

Please note that these Connectors are also referred to as 2-prong, 2-pole, 2-way, and flat trailer plugs.  They are often found in the battery maintenance industry (for example: on the output of a battery tender) and in the portable solar charger industry.  A basic version is commonly available from Hopkins Manufacturing as P/N 47965 as they are used in the trailer industry.

We endeavor to bring High Quality Made in the USA SAE 2 Pin Connector Assembly Configurations to the Marketplace.

Link to the Products pictured above: http://www.solarcapitalist.com/sae2pin-junction-strain-relief-grip-connector.aspx

To view our full Product Line – Please visit our Solar Capitalist LLC ecommerce store at: www.solarcapitalist.com

For Commercial Quantity purchases – Please Call Us at 302-562-1706 or email Us at: solaray@solarcapitalist.com

 

 

 

Leave a Comment :, , , , , , , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...