SAE 2 Pin

Tag: 2 pin

American Made Heavy Duty SAE 2 Pin Assembly Variations

by on Feb.05, 2012, under HD Variations

Having taken on making our niche SAE 2 Pin connectors, the idea of developing a wide assortment of heavy duty variations occurred to us.  Not long after developing and manufacturing our initial offering we began addressing heavier AWG assemblies.  In this post, we will discuss the variation stages we have ventured through thus far.

Note:  All of these products are manufactured here in the United States.

The first offering manufactured by us was the assembly below – high quality SAE 2 Pin connector with enhanced strain relief and 11-1/2″ Black of SPT-1 cord with 18 AWG leads.  These proved popular with do-it-yourselfers wiring up light accessory circuits, etc.  Following that came that same SAE 2 Pin connector with 5 feet of Black SPT-1 and 16 AWG leads.

 

 

 

 

 

 

The first of our heavier duty line to be developed and manufactured was SAE 2 Pin pigtail assemblies with 12 AWG leads – 12″ long.

 

               

 

 

 

 

 

These were welcomed by do-it-yourselfers, as well – especially with solar enthusiasts, amateur radio enthusiasts, and others with a desire for SAE 2 Pin connectors with up-sized leads.

Initially, we manufactured this product with lead insulation colored red and black.  We called the pigtail “Power Side” when the red insulated wire lead to the protected “socket” side of the SAE 2 Pin, and called it a “Load Side” pigtail when the red insulated wire lead to the exposed male pin side of the SAE 2 Pin.

Next to be addressed was SAE 2 Pin pigtail assemblies with 10 AWG leads – 12″ long.

 

 

 

 

 

 

 

We chose to stick with black insulated/separate 10 AWG cables vs. red/black insulation – thus leaving polarity up to the installer.

Those two variations in hand, we were quick to follow with SAE 2 Pin “whip assemblies” 5 foot long leads in both 12 and 10 AWG.  Again, we choose to stick with black insulated/separate cables vs. red/black insulation.

 

As you can imagine, applying an SAE 2 Pin connector to the far end was right around the corner.  So, we started cranking out SAE 2 Pin Extensions with black insulated/separate 10 AWG cables – 5, 8, and 10 foot long.

 

 

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , , , , , more...

Basics of SAE 2 Pin Connector Assembly Polarity

by on Feb.04, 2012, under Polarity

Whenever one contemplates use of SAE 2 Pin connectors, an understanding of, and attention to, “polarity” is vital.  Vital in terms of safety, and avoiding possible damage to components.

For the novice (and those who have forgotten) – “polarity” means identifying the “hot” (+) positive side of the connector vs. the negative (-) side.

When there are leads of different insulation colors, say red and black (or white) – the red insulation by standard indicates “hot” (+) positive.

Understand this is a standard, but one should always test to confirm.  Such a test would entail connecting a voltmeter contacting the end of this red insulated lead at the connector and ground.  If there is a voltage indicated (probably 12 volts), then we have confirmed this is indeed the “hot” (+) positive side.

Obviously, with respect to the (-) negative side, the opposite would be the case.  In accordance with standard, this would be indicated by an insulation color other than red – usually black, or white.

Understand that there are times when a color other than red is used to indicate “hot” (+) positive.  For example, if there are several “hot” (+) positive wires (such as in the case of car stereo wiring, i.e., radio power, and keep alive power for memory) a color like yellow might be a “hot” (+) positve wire.

Another application in which there will be multiple “hot” (+) positive wires would be in a trailer light wiring harness and at the vehicle’s disconnect plug.  Even for simple trailer light wiring systems, there may be three “hot” wires – each for various lights (running lights, turn signals, brakes).  Of course there will be a ground (usually black) shared by each of these individual circuits.  In fact, the metal trailer frame is the ground for individual lights in many cases.

While on the subject of trailer lights, it should be noted that this an application in which the SAE 2 Pin connector can be found.  In fact, it is often called a “2 pole flat trailer connector”.  12″ red and white extensions with these connectors can be readily found in the trailer hitch (trailer lights, wiring and connectors) area of your local discount automotive store – most certainly Hopkin’s products.  These are great, certainly filling the bill in many other light applications.  “Light” meaning low current applications, since the wiring is generally 16 or 18 AWG.

These extensions are true “extensions”, i.e., properly connected, you end up with the polarity you started with… at the far end of the extension.  …if the red “hot” (+) positive wire is leading to the female side of the SAE 2 Pin you want to extend 12″… upon coupling the end of one of these 12″ extensions with the red wire leading to the exposed male pin…  the opposite end will have the red wire of the 12″ extension leading to the female side of the SAE 2 Pin at the other end.

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

 

 

 

Leave a Comment :, , , , , , , , , , , more...

SAE 2 Pin Configurations

by on Feb.04, 2012, under Configurations

 

SAE 2 Pin configurations range from the basic…

 

 

to those with added strain relief…

 

 

Connectors with enhanced strain relief provide the added benefit of being a little easier to manipulate when coupling and uncoupling.

Raised bars on the flat sides of these connectors make them easier to grip when coupling and uncoupling.

Another configuration difference see above is separated leads (of different colors) vs. Black SPT-1 cord.

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our  www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , more...

Hello world!

by on Feb.04, 2012, under News

Welcome to our new SAE 2 Pin website !!!  Created to increase awareness and knowledge of the handy SAE 2 Pin connector, our Blog format facilitates interaction along these lines.

We have several years of experience focusing on SAE 2 Pin connectors, leads, and cable assemblies through our other two websites: www.bohemianbiker.com and www.solarcapitalist.com  Where there had been limited attention, we developed and manufactured SAE 2 Pin assemblies with heavier gauge leads (14, 12, and 10 AWG vs. only 18 and 16 AWG).  Worth noting – the high quality SAE 2 Pin assemblies we have developed are manufactured right here in the United States.

It is our mission to post that which we’ve learned, provide this forum through which others may contribute their pertinent knowledge, and have this same forum also allow all to raise questions in the form of posts and comments.  Thereby, making this accumulation of posts and comments available to all those with an interest.  We welcome your active participation!

Always with an eye on that which will please our audience, we are vigilantly watching for emerging needs.  Where a custom SAE 2 Pin connector assembly is required (even with a different connector at the opposite end) please contact us to discuss it’s potential development and production.  We are well prepared to address such opportunities – quickly and efficiently.

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed on this website, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , , , , , , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...