SAE 2 Pin

Tag: 2 pole

2 Pin Connector for Portable Solar – PV

by on Jan.23, 2017, under Configurations

We make available High Quality American Made 2 Pin Connector configurations, with enhanced features tailored to Portable Solar – PV applications.

Flanged Panel / Bulkhead / Surface Mount  2 Pin Connector Junction with 12″ long 12 AWG  Black Cord Pigtails.

 

Flanged Panel Surface Mount 2 Pin Connector

Flanged Panel Surface Mount 2 Pin Connector

 

Flanged Panel Surface Mount 2 Pin Junction

Flanged Panel Surface Mount Junction

 

Shrouded 2 Pin Connector Junction with 12″ long 12 AWG  Black Cord Pigtails.

 

Shrouded 2 Pin Junction

Shrouded 2 Pin Junction

 

These assemblies have an enhanced elongated connector body configuration for greater strain relief and ease in manipulation (coupling & uncoupling).

The features of these enhanced connectors are an improvement over shorter configurations used mostly in past automotive applications.  An example would be the SAE 2 Pole Flat connectors for 12 volt trailer hitch applications manufactured by Hopkins ( Part No. 47965 ).

Our Improved Design Connectors are great for Portable Solar Applications, especially PV on Campers, Motor Homes, Travel Trailers, and Boats, for Camping, Hiking, Hunting, Fishing, as well as, Emergency Preparedness.

Shroud design provides greater water resistance, especially installed with shroud edge down, such that it provides a “drip edge”.

 

Shrouded 2 Pin showing drip edge

Shrouded 2 Pin showing drip edge

 

Elongated configuration, enhanced with serrations for better grip is much more easily manipulated (coupled & uncoupled).

Combined with the benefit of greater strain relief, our extended configuration is the High Quality Heavy Duty alternative to the generic configuration.

We manufacture under the name Bohemian Biker LLC, and carry out ecommerce under the name Solar Capitalist LLC.

Technical posts can be found at www.bohemianbiker.com and ecommerce at www.solarcapitalist.com

Email Ray Bowers at solaray@solarcapitalist.com

Commercial Customers interested in Quantity orders are encouraged to call Ray Bowers at 302-562-1706

 

 

Leave a Comment :, , , , , , , , , , , , , , , , , more...

2 Way Connector as an Alternate Designation for SAE 2 Pin

by on May.07, 2016, under Terminology

Clearly, there are a large number of people who don’t even know these particular designations.

We have been banking on the “SAE 2 Pin” designation, as we feel this automotive designation is most appropriate.

In the interest of capturing the attention of a greater number of seekers, we are keenly attentive to what words others might use in a search.

Somehow “2 way” doesn’t seem all that descriptive, but nevertheless it seems to have caught on with at least a few manufacturers, suppliers, and seekers.

Furthermore, it seems ironic (at least to US – focused on “Made in USA”) that a product manufactured outside the US should become the most prevalent found via an internet search. The Hopkins Manufacturing product 47965 labeled a “2 Pole Flat” connector assembly is found in the towing or trailer equipment area of many discount automotive stores.

Hopkins 2 Pole Flat 47965

Hopkins Product 47965

In our experience (as discussed in previous posts), we have come upon such phrases as “2 prong”, “2 pole”, “2 conductor”, “flat trailer connector”, “12 volt dc connector” being used, as well.

It’s somewhat puzzling to US that the manufacturers of a product marketed and sold in “automotive” stores would chose designations other than that of SAE (Society of Automotive Engineers). Maybe the SAE has rights to that specific designation, and that precludes use of the designation? It wouldn’t seem so, considering the connector design itself is used and simply labeled with an alternate designation.

Without a doubt, what matters is what gets the seeker to that which he or she seeks.

Solar Capitalist LLC products at www.solarcapitalist.com

Tech Discussions at www.bohemianbiker.com

Leave a Comment :, , , , , , , , , , more...

American Made SAE 2 Pin Connector Quality

by on Aug.18, 2015, under USA #1

Imported SAE 2 Pin Extension

We have a customer that has used Our Products in His Application for several years now, and He has undergone some pertinent learning.

Initially, in the interest of economy, He had been purchasing the cheaper SAE 2 Pin assemblies coming from offshore.

As might have been anticipated, the lower quality imported product wasn’t holding up to the constant coupling & uncoupling.

These short SAE 2 Pin connectors lacking the enhanced reinforcement of Our American Made line, often succumb to conductor breakage within the insulation at the back of the connector body.

This occurs because with manipulation, the conductors get bent back and forth and work harden – making them brittle and subject to breakage.

Our American Made SAE 2 Pin Connectors have an Extended Body which adds Reinforcement, and therefore “Strain Relief” which avoids the type failure described above.

The Extended Body of Our American Made SAE 2 Pin Connectors also provides for Enhanced Grip and Ease in Manipulation.

These Features are Especially Appreciated in not only High Use Applications, but Harsh Environments as well.

Consider coupling and uncoupling in Frigid Weather when the materials are not only hard & brittle, but the wearing of gloves may make the Extended Body Much Appreciated.

Beyond the Basic Extended Body SAE 2 Pin Connector We offer with 18 & 16 AWG, We offer an Enhanced Grip Model with 12 AWG.

We also make this Enhanced Grip Model available in a Shrouded Version, which provides Protection over the Junction.

As can be seen, producing and offering SAE 2 Pin Connectors in an Expanded array of Configurations as well as Wire Gauge & Lengths is what We are all about.

It is Our Mission to Provide Ease in Obtaining the SAE 2 Pin Assemblies that Best Meet Our Customer’s Needs & Desires, be it an existing configuration, a variation, or an assembly Engineered to Meet Unique Specifications.

Our Engineering Experience aids Us in understanding and communicating in a Professional Manner, yet with Intention – We Seek Out and Enjoy interaction with Customers Appreciating Our Willingness to Assist in the Development of an Assembly that would meet Specific Needs.

We will Never Forget Those that have extended Patience & Understanding to Us in the Development of Our Niche, and with Intention – We Attend to Passing that Spirit Forward.

Our Expertise developed out of being Educated as an “Hands On” Agricultural Engineer, spending most of career as an Engineer in the Nuclear Power Industry and other heavy Industrial Environments, and then going “small business” in the Battery Maintenance and Portable Solar Industries.

One of Our Delights is coming to Know New Applications We hadn’t even considered – Examples: Fishing Lights, Electronic Game Calls, Tractor Mounted Spray Units…

Note: SAE 2 Pin Connectors are also referred to as 2-prong, 2-pole, 2-way, and flat trailer plugs.  They are often found in the battery maintenance industry (for example: on the output of a battery tender) and in the portable solar charger industry.  A basic version is commonly available from Hopkins Manufacturing as P/N 47965 as they are used in the trailer industry.

We endeavor to bring High Quality Made in the USA SAE 2 Pin Connector Assembly Configurations to the Marketplace.

To view our full Product Line – Please visit our Solar Capitalist LLC ecommerce store at: www.solarcapitalist.com

For Commercial Quantity purchases – Please Call Us at 302-562-1706 or email Us at: solaray@solarcapitalist.com

 

 

Leave a Comment :, , , , , , more...

Electronic Coyote Caller w/ SAE 2 Pin

by on May.19, 2015, under Application

Our 1st Electronic Coyote Caller – a Business Project, as well as a Hunting Project prompted by the skyrocketing Coyote population in Georgia which is impacting the survival rate of Young Deer & Turkeys – Big Time !!!

Research online quickly provided guidance on components as well as calling.  Within minutes We had a loudspeaker and amplifier ordered on amazon.com (Radio Shack was recommended, but seems to be tapped out and headed for bankruptcy).

Being Cat Lovers with 3 Rescues, We go through buckets of Kitty Litter. We save the empty litter buckets because We find them very handy & efficient for storage (they’re rectangular, stackable, have lids and a carry handle, etc.).

I was immediately envisioning use of a kitty litter bucket in the assembly of a electronic coyote calling setup.

Coyote Caller Components

Coyote Caller Components

A sealed 12 Volt AGM Battery (We have these on hand for other projects – generally Solar) mounted in the bottom of the bucket would provide weight for stability as well as Power.

Coyote Caller battery mount

Coyote Caller battery mount

A Fused Battery Pigtail with SAE 2 Pin Connector (available from US) will not only provide for access to Power, but for connection to a Battery Tender for recharging as well.

An SAE 2 Pin pigtail with 18 AWG leads (available from US) was installed on the power leads of the amplifier.  The leads on the amplifier are lighter, but this combination lends itself well to ease in coupling & uncoupling, and therefore durability.

Same with the Speaker connection wiring – installed using an SAE 2 Pin Junction with 18 AWG leads.  This facilitates easy disconnection for disassembly.

Part of the Beauty of the Bucket is that it not only facilitates assembly and protects the components – out of sight, but keeps all the wiring & connections contained.

The amplifier was mounted on the underside of the “trap door” lid to facilitate easy access to volume control during operation.

Electronic Coyote Caller Assembled with iPod

Electronic Coyote Caller Assembled with iPod

The bucket was camouflaged with spray paint using leaves & pine boughs for pattern.

Our Parts List:

(1) Pyle PHSP4 Indoor/Outdoor 6″ PA Horn Speaker – 50W

(1) Pyle PLIPA2 Mini Amplifier (w/ iPod connection)

(1) 12 Volt AGM Battery

(1) Fused Battery Pigtail w/ SAE 2 Pin Connector

(3) SAE 2 Pin 18 AWG pigtails + 1/8″ heat shrink tubing & solder (for power & speaker wiring)

(1) Kitty Litter bucket with “trap door” top

(6) Fastener Assy’s for Speaker

(4) Fastener Assy’s for Amplifier

(1) Green, (1) Brown, (1) Gray, (1) Black spray paint (to facilitate camouflage painting using tree limbs, pine boughs, etc.)

*Note: SAE 2 Pin Connectors are also referred to as 2-prong, 2-pole, 2-way, and flat trailer plugs.  They are often found in the battery maintenance industry (for example: on the output of a battery tender) and in the portable solar charger industry.  A basic version is commonly available from Hopkins Manufacturing as P/N 47965 as they are used in the trailer industry.

We endeavor to bring High Quality Made in the USA SAE 2 Pin Connector Assembly Configurations to the Marketplace.

To view our full Product Line – Please visit our Solar Capitalist LLC ecommerce store at: www.solarcapitalist.com

For Commercial Quantity purchases – Please Call Us at 302-562-1706 or email Us at: solaray@solarcapitalist.com

Leave a Comment :, , , , , , , more...

SAE 2 Pin Max Strain Relief & Grip

by on May.13, 2015, under Configurations, HD Variations, USA #1

SAE 2 Pin Max Strain Relief Grip

SAE 2 Pin Max Strain Relief Grip

News Flash: We’ve responded to Customer Feedback with the above SAE 2 Pin Configuration featuring enhanced Strain Relief and Grip.

We often hear customers lament with respect to the impact of frequent manipulation of the economical mass produced SAE 2 Pin connectors available in discount automotive stores.  Specifically, trouble coupling & uncoupling connectors, and conductors breaking within the insulation at the back end of the connector.  Clearly, these connector configurations are not designed with ease in coupling & uncoupling in mind.

In Answer to the Desires of Our Customers, We have Produced the above Enhanced Configuration featuring Max Strain Relief & Grip.

Please note that these Connectors are also referred to as 2-prong, 2-pole, 2-way, and flat trailer plugs.  They are often found in the battery maintenance industry (for example: on the output of a battery tender) and in the portable solar charger industry.  A basic version is commonly available from Hopkins Manufacturing as P/N 47965 as they are used in the trailer industry.

We endeavor to bring High Quality Made in the USA SAE 2 Pin Connector Assembly Configurations to the Marketplace.

Link to the Products pictured above: http://www.solarcapitalist.com/sae2pin-junction-strain-relief-grip-connector.aspx

To view our full Product Line – Please visit our Solar Capitalist LLC ecommerce store at: www.solarcapitalist.com

For Commercial Quantity purchases – Please Call Us at 302-562-1706 or email Us at: solaray@solarcapitalist.com

 

 

 

Leave a Comment :, , , , , , , , , more...

DC Connector Terminology

by on Mar.09, 2012, under Terminology

Whenever one choses to delve into a technical topic, it’s worthwhile to begin with a study of pertinent terminology.  Generally speaking, it won’t be long before you start bumping into terms that are key to gaining an understanding.

The handy SAE 2 Pin connector is a great example.  We all had some exposure to basic electrical concepts in our early years, but not everyone has experienced continued exposure throughout their life.

If you were to begin looking for some information on the SAE 2 Pin connector, you’d probable come by it being described as a type of “DC connector”.   Now many are reminded of the terms AC and DC by the name of one of my favorite bands.  Some people might understand that what they access at a household electrical outlet is AC, and maybe even that AC stands for “alternating current”.  I hesitate to think that very many people actually have a firm grasp on just what “alternating current” means, let alone – “DC”, and “direct current”.

I’m not poking fun at anybody.  Many of us are very knowledgeable about areas of technology without any reason to have this particular knowledge.  An engineer, and the son of an electrician (early in his career), I’ve had quite a bit of exposure to electrical concepts throughout my life.

Direct Current (DC) being that which pertains to the topic of SAE 2 Pin connectors, that will be our focus in this discussion.  Any discussion of DC vs. AC is going to involve explaining that the “direct” vs. “alternating” pertains to the direction of the flow of electric charge.  Direct Current (DC) is the flow of electric charge in one direction.  Alternating Current (AC) is the flow of electric charge in both directions, i.e., “alternating” one then the other.

Alternating Current (AC) is what we access at household electrical outlets, but it also describes that which is produced by an Alternator.  An alternator converts mechanical energy (the belt driven rotation) to electrical energy in the form of alternating current.  An electrical device called a rectifier converts alternating current (which periodically reverses direction), to direct current (which flows in only one direction).  A rectifier produces a type of DC characterized by pulsating voltages and currents.  This type of DC current may then be further modified into the type of relatively constant voltage DC characteristically produced by such sources as batteries and solar cells.  There’s a lot of room for further discussion along these lines.  For our purposes, let’s leave it at the above for now.

As stated above, it is Direct Current (DC) that is produced by a battery.  It is direct current that used to charge batteries, as well.  Most electronic systems employ a DC power supply.  It follows then that a “DC Connector” is an electrical connector used in supplying Direct Current (DC) power.  There are numerous standardized DC Connectors with specific dimensions and configuration to prevent accidental connection of incompatable sources and loads.

An important aspect of a connector is its “Pinout” – which describes the function of its contacts (or “pins”).  That function may be Power (“+” positive, or “-” negative/ground), or Signal related (as in the case of a USB connector with “+” Data and “-” Data contacts).

When it came time for battery maintenance industry leader, Deltran, to select a DC Connector for the output of their Battery Tender line – the SAE 2 Pin connector was no doubt the hands-down choice.  Common in the automotive industry, its selection by battery maintenance equipment manufacturers makes sense.

Most peoples’ likely exposure to the SAE 2 Pin connector probably has to do with its use in trailer light systems.  SAE 2 Pin assemblies can often be found in the trailer lighting section of automotive stores.  Hopkins Manufacturing (the name you’re likely to most often see associated with trailer light wiring products), calls these 2 Pole Flat connector assemblies – Product No. 47965.

It was then likely to follow that upon development of Portable Solar Chargers, the SAE 2 Pin connector was to be the choice.  Industry leader, Global Solar, chose the SAE 2 Pin connector for the output of the majority of their SUNLINQ line of portable solar chargers.  In fact, their 6.5W and 12W models feature a 5-piece SAE 2 Pin accessory cable kit.

These two applications give rise to the next topic – “polarity”.  Polarity being which side of a particular connector is “hot” (+) positive, and which side is (-) negative.

In the case of Battery Tenders, the connector polarity is driven by the necessity for it to be the “protected” female side of the SAE 2 Pole connector at the end of the assembly connected to a vehicle battery to be the “hot” (+) positive side.  Therefore, the exposed pin side of the SAE 2 Pin on the end of a Battery Tender output must be “hot” (+) positve.

Portable Solar Chargers are a different situation, since the solar cells are a power source.  Their output connection must therefore be of the polarity which will have the “protected”  female side of the SAE 2 Pin connection being the “hot” (+) positive.  Accessory assemblies must then be of a polarity in which the exposed male pin of the SAE 2 Pin meant to be plugged into the output connection of a portable solar charger must be the “hot” (+) positve.

Anyone connecting leads in circuits such as those discribed above must be carefully mindful of polarity.  There may even be times when it is necessary to use a multi-tester to confirm polarity.  The continuity test function of a multi-tester can be employed to determine which contact (or pin) on the connector at one end of a lead is mapped to (leads to) which contact on the connector at the other end.

Well, we’ve covered quite a few electrical terms and concepts – enough for now.

In addition to questions of concerns in the form of comments to this Blog post, email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit  www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

 

 

Leave a Comment :, , , , , , , , , , , , , , , , , , more...

SAE 2 Pin Assemblies Manufactured in the USA !!!

by on Feb.09, 2012, under USA #1

Our own SAE 2 Pin assemblies are manufactured right here in the USA.  The quality is indicative of American workmanship.  Each and every piece is visually inspected in an effort to assure the highest level of quality is maintained.

We make other manufacturer’s products available, as well – some of which may have been produced outside of the USA.  These are quality products, as well, meeting the necessary form, fit, and function requirements of their intended use.  The companies that manufacture these products (or contract for their manufacture), conduct quality control inspections of these products and stand behind them.

There are also the mass produced SAE 2 Pin connector assemblies available on the market (generally found in discount automotive stores).  Having handled thousands of these light duty SAE 2 Pin assemblies produced outside of the USA, we have become accustomed to seeing a significant number of what we call “blems”.  These “blemished” assemblies generally have a visual defect, cosmetic in nature.  For example, a very small (sometimes almost indiscernible) void in the molded plastic of the connector body which exposes a minute amount of insulation.  Again, these are cosmetic in nature, and do not negatively impact the form, fit, and function of the connector – they can still carry out their intended function in a perfectly safe manner.  If you were to buy a number of these individually packaged SAE 2 Pin assemblies, you would likely come upon a “blem” or two.

Our position is one based in perceiving a world of plenty.  There exists an opportunity for any manufacturer to bring their products to the global marketplace.  The world will be the judge of the viability of those products – based on their quality, price, and availability.

As American Citizens, and as a U.S. Citizen-owned companies – We are committed to putting America 1st.  Manufacturing in America 1st, and obtaining supplies and services here in America 1st.  That’s conscientiously doing Our part as American Citizens to keep America 1st by giving Americans the opportunity to produce 1st.  It is up to each and every one of US, as American Citizens, to see to it We are competitive in the Global Marketplace.  When we’re not, the sales and the supporting production will go to those who are – that’s inherant in the “free” marketplace.

 

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit  www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , , more...

SAE 2 Pin Defined

by on Feb.08, 2012, under Terminology

As indicated by the “SAE” aspect of this connector’s designation, the specifications for this connector were developed by the Society of Automotive Engineers.  Learning that, we are quick to realize this connector was (at least initially) intended for use in automotive industry applications.   Therefore, the SAE 2 Pin Connector was developed for use in DC (Direct Current) circuits – most often 12 Volt DC.  So in the world of electrical connectors, the SAE 2 Pin Connector would be loosely defined as a type of “DC Connector”.

Further defintion of an SAE 2 Pin might include the description “hermaphrodite” two conductor DC connector.  The term “hermaphrodite” is applicable because each connector includes both “male” and “female” components – an exposed “male” pin, and a protected “female” socket.

An SAE 2 Pin Connector is often seen on the output of battery maintenance equipment, such as the industry leader – Deltran Battery Tenders.

Therefore, the associated accessory assemblies are outfitted with an SAE 2 Pin connector of the polarity necessary to carry out the intended function.  For example, a Deltran Battery Tender “Quick Connect” assembly, to which a Battery Tender output can be coupled to maintain a motorcycle 12V battery’s charge during periods of little or no use.

Thus far in this post, we have focused on the term “SAE 2 Pin”, but this connector is often given other names – SAE 2 Prong, SAE 2 Pole, SAE 2 Conductor, 2 Pole Flat Trailer Connector, etc.  It’s pretty clear that “SAE 2 Pin’ is indeed the appropriate terminology, based on the connector’s specification developer (SAE – Society of Automotive Engineers) and this term’s consistant use.

 

The SAE 2 Pin connector has surfaced as the predominant choice in the portable solar charger industry, as well.  For example, Global Solar’s SUNLINQ 6.5 and 12 Watt portable solar chargers have an SAE 2 Pin connector on their output cable.  The associated accessory kit consists of 5 cable assemblies with SAE 2 Pin connectors.  The polarity of these assemblies is specific to their use coupled to the output of the 6.5W or 12W portable solar charger.

Deltran’s 5W, 10W & 15W Solar Panel powered Battery Tenders feature and SAE 2 Pin output, as well.

The predominance of the SAE 2 Pin connector in 12 Volt DC applications is prompting a growing assortment of cable assemblies and adapters.  For example, SAE 2 Pin x COAX adapters.

SAE 2 Pin connectors are being made available in a wider range of wire gauge, as well.  Heavier AWG leads are facilitating greater current carrying capacities, and thereby use in higher current flow applications.

 

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit  www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , , , , , more...

Replacement SAE 2 Pin Connector Cap – Made in the USA !!!

by on Feb.08, 2012, under Caps

One often heard request was for SAE 2 Pin “Caps”, which we took on answering.  Our searches for a supplier came up empty handed, so we endeavored to manufacture one.

Of course, that involved the development of a mold.  Never-the-less, willing to go the distance – we made that investment.

So, here’s a look at them:

 

Because we’ve manufactured them with a relatively soft rubber, they are easily manipulated onto a connector – and they remain in place.

 

 We’re pleased with this product, and able to offer quantities at a very reasonable cost.

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , more...

American Made Surface Mountable SAE 2 Pin Connectors

by on Feb.06, 2012, under Mountable

We now have our own Surface Mountable SAE 2 Pin Connector Assembly to offer – another quality Bohemian Biker LLC product  manufactured right here in the United States !!!

Initially, we found and provided an Surface Mount SAE 2 Pin assembly that was “polarity specific”.  That is, it had red and black insulated leads and was most readily available in one polarity.

This “polarity specific” assembly had 12 AWG leads, which seemed to be an adequate choice in terms of ampacity (current carrying capacity) for many do-it-yourself applications.

Quickly recognizing its popularity, we set out to develop our own SAE 2 Pin Surface Mount assembly.  Ours has 12″ of Black cord, such that the installer has the latitude to choose the polarity without violating a “hot” (+) positive wire insulation color standard.  The black cord of our product not only provided the benefit of “polarity of choice”, but the added aesthetic value of “all black” desirable in many applications.  An added benefit of this softer black cord is its flexibility, a desirable feature in many applications.

The ability to solidly mount an SAE 2 Pin connection on a soft (such as in the case of a motorcycle tank bag) or rigid surface (such as in the case of a plastic motorcycle saddlebag case), can be of key importance in many do-it-yourself applications.  It not only has advantages in terms of convenience, but also often in terms of security and sealing out moisture.

Some might also refer to this form of SAE 2 Pin connector as a “bulkhead connector”.  In an application where you have multiple compartments (in, for example, some sort of an enclosure, or box), one of these “surface mount connectors” could be used as a “bulkhead connector”.  A “bulkhead” being a wall or barrier between two adjacent compartments.

Just like the model we found initially available, ours has a tethered cap – which is a cool feature.  A surface mount’s “inset” configuration provides some inherent protection, but the protection added by a cap if often appreciated.  A cap adds to aesthetics when the connection is not not in use, as well.

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Direct product link:  http://www.solarcapitalist.com/sae2pin-surface-mount-connector-pigtail.aspx 

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

 

Leave a Comment :, , , , , , , , , , , , , , , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...