SAE 2 Pin

Tag: sae 2

2 Pin Connector for Portable Solar – PV

by on Jan.23, 2017, under Configurations

We make available High Quality American Made 2 Pin Connector configurations, with enhanced features tailored to Portable Solar – PV applications.

Flanged Panel / Bulkhead / Surface Mount  2 Pin Connector Junction with 12″ long 12 AWG  Black Cord Pigtails.

 

Flanged Panel Surface Mount 2 Pin Connector

Flanged Panel Surface Mount 2 Pin Connector

 

Flanged Panel Surface Mount 2 Pin Junction

Flanged Panel Surface Mount Junction

 

Shrouded 2 Pin Connector Junction with 12″ long 12 AWG  Black Cord Pigtails.

 

Shrouded 2 Pin Junction

Shrouded 2 Pin Junction

 

These assemblies have an enhanced elongated connector body configuration for greater strain relief and ease in manipulation (coupling & uncoupling).

The features of these enhanced connectors are an improvement over shorter configurations used mostly in past automotive applications.  An example would be the SAE 2 Pole Flat connectors for 12 volt trailer hitch applications manufactured by Hopkins ( Part No. 47965 ).

Our Improved Design Connectors are great for Portable Solar Applications, especially PV on Campers, Motor Homes, Travel Trailers, and Boats, for Camping, Hiking, Hunting, Fishing, as well as, Emergency Preparedness.

Shroud design provides greater water resistance, especially installed with shroud edge down, such that it provides a “drip edge”.

 

Shrouded 2 Pin showing drip edge

Shrouded 2 Pin showing drip edge

 

Elongated configuration, enhanced with serrations for better grip is much more easily manipulated (coupled & uncoupled).

Combined with the benefit of greater strain relief, our extended configuration is the High Quality Heavy Duty alternative to the generic configuration.

We manufacture under the name Bohemian Biker LLC, and carry out ecommerce under the name Solar Capitalist LLC.

Technical posts can be found at www.bohemianbiker.com and ecommerce at www.solarcapitalist.com

Email Ray Bowers at solaray@solarcapitalist.com

Commercial Customers interested in Quantity orders are encouraged to call Ray Bowers at 302-562-1706

 

 

Leave a Comment :, , , , , , , , , , , , , , , , , more...

Overmold 2 Pin Connector Specification

by on Jan.19, 2017, under Compliance

Extended Shroud 2 Pin Solar Connector

Extended Shroud 2 Pin Solar Connector

We are moving further along in Our efforts to address the emerging business needs of our Customers..  Specifically, we have developed a specification for some of our products gaining significant commercial attention.  This specification is yet another component piece of documentation that addresses commercial customer needs, especially the needs of those commercial enterprises doing business with government agencies or in the international marketplace.

Maintaining the paper trail documenting specified requirements having been met is often critical to qualifying as an approved vendor in today’s marketplace.

We are leveraging on years of previous experience in this business, and having developed the necessary detail oriented approach and follow through.

RoHS, REACH, and Conflict Minerals requirements create even greater need for this detail oriented approach.  Maintaining impeccable files providing a document paper trail with continuity is critical.

Upon researching, we found that there is no specification addressing the SAE 2 Pin overmold connector.  SAE (Society of Automotive Engineers) Specification J928 addresses “Electrical Terminals – Pin and Receptacle Type” and SAE J1239 addresses 4, 5, and 8 pin trailer connectors, but there doesn’t seem to be an SAE specification for the 2 pin overmold configuration.

Seems the 2 pin overmold configuration was sort of a spin off developed in the early ’80’s using the spacing from the SAE 4 pin connector addressed by SAE J1239.  So, technically speaking, the 2 pin configuration is not governed by any SAE standard, but they were developed to be compliant with SAE J928 and J1239.

Certainly, the SAE perspective was toward automotive applications, including: trailer hitch/lighting wiring, onboard mechanisms (such as power windows), and battery maintenance.

The use of this connector in portable solar applications has presented some new circumstances, ranging from higher current carrying capacities to harsher environments (resistance to ultraviolet light becoming desirable).  In application to Portable PV, added strain relief is clearly a benefit, both in terms of durability and ease of manipulation.

In fact, it may be appropriate for a designation more accurate to the configuration be applied to this connector, such as “2 pin solar connector”.

Questions or requests for additional information about Our 2 Pin Connectors or Specifications can be directed to Ray Bowers at email: solaray@solarcapitalist.com or call/text at  302-562-1706

Leave a Comment :, , , , , , , , , more...

Availability of SAE 2 Pin Connectors and Connector Assemblies

by on Oct.25, 2012, under Availability

In addition to providing a forum for dicussions pertinent to SAE 2 Pin Connectors, making SAE 2 Pin connectors and assemblies readily available with a range of wire sizes at economical prices is our mission.

This website was created to be even more specific to the SAE 2 Pin Connector – rather than it’s application.  It was created to supplement our initial websites:  www.bohemianbiker.com and www.solarcapitalist.com

For those wishing to procure SAE 2 Pin connector assemblies in quantity, we strongly suggest calling us at 302-562-1706, or emailing us at sae2pinray@sae2pincom

Calling or emailing will allow us the opportunity to address your needs/desires specifically.

We have a very large inventory of the 16 AWG SAE 2 Pin Extension (12″) Assembly most widely available on a retail basis – in bulk form (i.e., not coiled up in individual packaging).

 

Often not immediately recognized – this 12″ extension can be cut in half (into 2 connector “pigtails”) to provide a”junction” when the plugs are connected, i.e., the red “hot” lead mapped to the exposed “male” pin on one connector (“load” side) mates up with the protected “female” socket side of the other (“power” side) connector pigtail.  We make this differentiation between “Load” side and “Power” side because as a matter of safe practice – Red insulation indicating “Hot” (+) Positive by standard would lead to the protected “female” socket side on the “power source” side (for example, battery side) of the Junction.

These handy, inexpensive SAE 2 Pin assemblies are often used to provide a circuit disconnection point in a convenient location – most often in 12 volt lighting and accessory circuit systems.

Where the quality associated with offshore mass production is adequate, these assemblies might be your choice – for applications in which higher quality assemblies produced here in the USA would be best, we can certainly meet those requirements, as well !!!

Again – we strongly recommend calling us at 302-562-1706, or emailing us at sae2pinray@sae2pin.com

We are well prepared to address your SAE 2 Pin connector assembly needs !!!

 

Leave a Comment :, , more...

DC Connector Terminology

by on Mar.09, 2012, under Terminology

Whenever one choses to delve into a technical topic, it’s worthwhile to begin with a study of pertinent terminology.  Generally speaking, it won’t be long before you start bumping into terms that are key to gaining an understanding.

The handy SAE 2 Pin connector is a great example.  We all had some exposure to basic electrical concepts in our early years, but not everyone has experienced continued exposure throughout their life.

If you were to begin looking for some information on the SAE 2 Pin connector, you’d probable come by it being described as a type of “DC connector”.   Now many are reminded of the terms AC and DC by the name of one of my favorite bands.  Some people might understand that what they access at a household electrical outlet is AC, and maybe even that AC stands for “alternating current”.  I hesitate to think that very many people actually have a firm grasp on just what “alternating current” means, let alone – “DC”, and “direct current”.

I’m not poking fun at anybody.  Many of us are very knowledgeable about areas of technology without any reason to have this particular knowledge.  An engineer, and the son of an electrician (early in his career), I’ve had quite a bit of exposure to electrical concepts throughout my life.

Direct Current (DC) being that which pertains to the topic of SAE 2 Pin connectors, that will be our focus in this discussion.  Any discussion of DC vs. AC is going to involve explaining that the “direct” vs. “alternating” pertains to the direction of the flow of electric charge.  Direct Current (DC) is the flow of electric charge in one direction.  Alternating Current (AC) is the flow of electric charge in both directions, i.e., “alternating” one then the other.

Alternating Current (AC) is what we access at household electrical outlets, but it also describes that which is produced by an Alternator.  An alternator converts mechanical energy (the belt driven rotation) to electrical energy in the form of alternating current.  An electrical device called a rectifier converts alternating current (which periodically reverses direction), to direct current (which flows in only one direction).  A rectifier produces a type of DC characterized by pulsating voltages and currents.  This type of DC current may then be further modified into the type of relatively constant voltage DC characteristically produced by such sources as batteries and solar cells.  There’s a lot of room for further discussion along these lines.  For our purposes, let’s leave it at the above for now.

As stated above, it is Direct Current (DC) that is produced by a battery.  It is direct current that used to charge batteries, as well.  Most electronic systems employ a DC power supply.  It follows then that a “DC Connector” is an electrical connector used in supplying Direct Current (DC) power.  There are numerous standardized DC Connectors with specific dimensions and configuration to prevent accidental connection of incompatable sources and loads.

An important aspect of a connector is its “Pinout” – which describes the function of its contacts (or “pins”).  That function may be Power (“+” positive, or “-” negative/ground), or Signal related (as in the case of a USB connector with “+” Data and “-” Data contacts).

When it came time for battery maintenance industry leader, Deltran, to select a DC Connector for the output of their Battery Tender line – the SAE 2 Pin connector was no doubt the hands-down choice.  Common in the automotive industry, its selection by battery maintenance equipment manufacturers makes sense.

Most peoples’ likely exposure to the SAE 2 Pin connector probably has to do with its use in trailer light systems.  SAE 2 Pin assemblies can often be found in the trailer lighting section of automotive stores.  Hopkins Manufacturing (the name you’re likely to most often see associated with trailer light wiring products), calls these 2 Pole Flat connector assemblies – Product No. 47965.

It was then likely to follow that upon development of Portable Solar Chargers, the SAE 2 Pin connector was to be the choice.  Industry leader, Global Solar, chose the SAE 2 Pin connector for the output of the majority of their SUNLINQ line of portable solar chargers.  In fact, their 6.5W and 12W models feature a 5-piece SAE 2 Pin accessory cable kit.

These two applications give rise to the next topic – “polarity”.  Polarity being which side of a particular connector is “hot” (+) positive, and which side is (-) negative.

In the case of Battery Tenders, the connector polarity is driven by the necessity for it to be the “protected” female side of the SAE 2 Pole connector at the end of the assembly connected to a vehicle battery to be the “hot” (+) positive side.  Therefore, the exposed pin side of the SAE 2 Pin on the end of a Battery Tender output must be “hot” (+) positve.

Portable Solar Chargers are a different situation, since the solar cells are a power source.  Their output connection must therefore be of the polarity which will have the “protected”  female side of the SAE 2 Pin connection being the “hot” (+) positive.  Accessory assemblies must then be of a polarity in which the exposed male pin of the SAE 2 Pin meant to be plugged into the output connection of a portable solar charger must be the “hot” (+) positve.

Anyone connecting leads in circuits such as those discribed above must be carefully mindful of polarity.  There may even be times when it is necessary to use a multi-tester to confirm polarity.  The continuity test function of a multi-tester can be employed to determine which contact (or pin) on the connector at one end of a lead is mapped to (leads to) which contact on the connector at the other end.

Well, we’ve covered quite a few electrical terms and concepts – enough for now.

In addition to questions of concerns in the form of comments to this Blog post, email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit  www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

 

 

Leave a Comment :, , , , , , , , , , , , , , , , , , more...

SAE 2 Pin Assemblies Manufactured in the USA !!!

by on Feb.09, 2012, under USA #1

Our own SAE 2 Pin assemblies are manufactured right here in the USA.  The quality is indicative of American workmanship.  Each and every piece is visually inspected in an effort to assure the highest level of quality is maintained.

We make other manufacturer’s products available, as well – some of which may have been produced outside of the USA.  These are quality products, as well, meeting the necessary form, fit, and function requirements of their intended use.  The companies that manufacture these products (or contract for their manufacture), conduct quality control inspections of these products and stand behind them.

There are also the mass produced SAE 2 Pin connector assemblies available on the market (generally found in discount automotive stores).  Having handled thousands of these light duty SAE 2 Pin assemblies produced outside of the USA, we have become accustomed to seeing a significant number of what we call “blems”.  These “blemished” assemblies generally have a visual defect, cosmetic in nature.  For example, a very small (sometimes almost indiscernible) void in the molded plastic of the connector body which exposes a minute amount of insulation.  Again, these are cosmetic in nature, and do not negatively impact the form, fit, and function of the connector – they can still carry out their intended function in a perfectly safe manner.  If you were to buy a number of these individually packaged SAE 2 Pin assemblies, you would likely come upon a “blem” or two.

Our position is one based in perceiving a world of plenty.  There exists an opportunity for any manufacturer to bring their products to the global marketplace.  The world will be the judge of the viability of those products – based on their quality, price, and availability.

As American Citizens, and as a U.S. Citizen-owned companies – We are committed to putting America 1st.  Manufacturing in America 1st, and obtaining supplies and services here in America 1st.  That’s conscientiously doing Our part as American Citizens to keep America 1st by giving Americans the opportunity to produce 1st.  It is up to each and every one of US, as American Citizens, to see to it We are competitive in the Global Marketplace.  When we’re not, the sales and the supporting production will go to those who are – that’s inherant in the “free” marketplace.

 

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit  www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , , more...

SAE 2 Pin Defined

by on Feb.08, 2012, under Terminology

As indicated by the “SAE” aspect of this connector’s designation, the specifications for this connector were developed by the Society of Automotive Engineers.  Learning that, we are quick to realize this connector was (at least initially) intended for use in automotive industry applications.   Therefore, the SAE 2 Pin Connector was developed for use in DC (Direct Current) circuits – most often 12 Volt DC.  So in the world of electrical connectors, the SAE 2 Pin Connector would be loosely defined as a type of “DC Connector”.

Further defintion of an SAE 2 Pin might include the description “hermaphrodite” two conductor DC connector.  The term “hermaphrodite” is applicable because each connector includes both “male” and “female” components – an exposed “male” pin, and a protected “female” socket.

An SAE 2 Pin Connector is often seen on the output of battery maintenance equipment, such as the industry leader – Deltran Battery Tenders.

Therefore, the associated accessory assemblies are outfitted with an SAE 2 Pin connector of the polarity necessary to carry out the intended function.  For example, a Deltran Battery Tender “Quick Connect” assembly, to which a Battery Tender output can be coupled to maintain a motorcycle 12V battery’s charge during periods of little or no use.

Thus far in this post, we have focused on the term “SAE 2 Pin”, but this connector is often given other names – SAE 2 Prong, SAE 2 Pole, SAE 2 Conductor, 2 Pole Flat Trailer Connector, etc.  It’s pretty clear that “SAE 2 Pin’ is indeed the appropriate terminology, based on the connector’s specification developer (SAE – Society of Automotive Engineers) and this term’s consistant use.

 

The SAE 2 Pin connector has surfaced as the predominant choice in the portable solar charger industry, as well.  For example, Global Solar’s SUNLINQ 6.5 and 12 Watt portable solar chargers have an SAE 2 Pin connector on their output cable.  The associated accessory kit consists of 5 cable assemblies with SAE 2 Pin connectors.  The polarity of these assemblies is specific to their use coupled to the output of the 6.5W or 12W portable solar charger.

Deltran’s 5W, 10W & 15W Solar Panel powered Battery Tenders feature and SAE 2 Pin output, as well.

The predominance of the SAE 2 Pin connector in 12 Volt DC applications is prompting a growing assortment of cable assemblies and adapters.  For example, SAE 2 Pin x COAX adapters.

SAE 2 Pin connectors are being made available in a wider range of wire gauge, as well.  Heavier AWG leads are facilitating greater current carrying capacities, and thereby use in higher current flow applications.

 

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit  www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , , , , , more...

Replacement SAE 2 Pin Connector Cap – Made in the USA !!!

by on Feb.08, 2012, under Caps

One often heard request was for SAE 2 Pin “Caps”, which we took on answering.  Our searches for a supplier came up empty handed, so we endeavored to manufacture one.

Of course, that involved the development of a mold.  Never-the-less, willing to go the distance – we made that investment.

So, here’s a look at them:

 

Because we’ve manufactured them with a relatively soft rubber, they are easily manipulated onto a connector – and they remain in place.

 

 We’re pleased with this product, and able to offer quantities at a very reasonable cost.

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , more...

American Made Surface Mountable SAE 2 Pin Connectors

by on Feb.06, 2012, under Mountable

We now have our own Surface Mountable SAE 2 Pin Connector Assembly to offer – another quality Bohemian Biker LLC product  manufactured right here in the United States !!!

Initially, we found and provided an Surface Mount SAE 2 Pin assembly that was “polarity specific”.  That is, it had red and black insulated leads and was most readily available in one polarity.

This “polarity specific” assembly had 12 AWG leads, which seemed to be an adequate choice in terms of ampacity (current carrying capacity) for many do-it-yourself applications.

Quickly recognizing its popularity, we set out to develop our own SAE 2 Pin Surface Mount assembly.  Ours has 12″ of Black cord, such that the installer has the latitude to choose the polarity without violating a “hot” (+) positive wire insulation color standard.  The black cord of our product not only provided the benefit of “polarity of choice”, but the added aesthetic value of “all black” desirable in many applications.  An added benefit of this softer black cord is its flexibility, a desirable feature in many applications.

The ability to solidly mount an SAE 2 Pin connection on a soft (such as in the case of a motorcycle tank bag) or rigid surface (such as in the case of a plastic motorcycle saddlebag case), can be of key importance in many do-it-yourself applications.  It not only has advantages in terms of convenience, but also often in terms of security and sealing out moisture.

Some might also refer to this form of SAE 2 Pin connector as a “bulkhead connector”.  In an application where you have multiple compartments (in, for example, some sort of an enclosure, or box), one of these “surface mount connectors” could be used as a “bulkhead connector”.  A “bulkhead” being a wall or barrier between two adjacent compartments.

Just like the model we found initially available, ours has a tethered cap – which is a cool feature.  A surface mount’s “inset” configuration provides some inherent protection, but the protection added by a cap if often appreciated.  A cap adds to aesthetics when the connection is not not in use, as well.

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Direct product link:  http://www.solarcapitalist.com/sae2pin-surface-mount-connector-pigtail.aspx 

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

 

Leave a Comment :, , , , , , , , , , , , , , , , , more...

American Made Heavy Duty SAE 2 Pin Assembly Variations

by on Feb.05, 2012, under HD Variations

Having taken on making our niche SAE 2 Pin connectors, the idea of developing a wide assortment of heavy duty variations occurred to us.  Not long after developing and manufacturing our initial offering we began addressing heavier AWG assemblies.  In this post, we will discuss the variation stages we have ventured through thus far.

Note:  All of these products are manufactured here in the United States.

The first offering manufactured by us was the assembly below – high quality SAE 2 Pin connector with enhanced strain relief and 11-1/2″ Black of SPT-1 cord with 18 AWG leads.  These proved popular with do-it-yourselfers wiring up light accessory circuits, etc.  Following that came that same SAE 2 Pin connector with 5 feet of Black SPT-1 and 16 AWG leads.

 

 

 

 

 

 

The first of our heavier duty line to be developed and manufactured was SAE 2 Pin pigtail assemblies with 12 AWG leads – 12″ long.

 

               

 

 

 

 

 

These were welcomed by do-it-yourselfers, as well – especially with solar enthusiasts, amateur radio enthusiasts, and others with a desire for SAE 2 Pin connectors with up-sized leads.

Initially, we manufactured this product with lead insulation colored red and black.  We called the pigtail “Power Side” when the red insulated wire lead to the protected “socket” side of the SAE 2 Pin, and called it a “Load Side” pigtail when the red insulated wire lead to the exposed male pin side of the SAE 2 Pin.

Next to be addressed was SAE 2 Pin pigtail assemblies with 10 AWG leads – 12″ long.

 

 

 

 

 

 

 

We chose to stick with black insulated/separate 10 AWG cables vs. red/black insulation – thus leaving polarity up to the installer.

Those two variations in hand, we were quick to follow with SAE 2 Pin “whip assemblies” 5 foot long leads in both 12 and 10 AWG.  Again, we choose to stick with black insulated/separate cables vs. red/black insulation.

 

As you can imagine, applying an SAE 2 Pin connector to the far end was right around the corner.  So, we started cranking out SAE 2 Pin Extensions with black insulated/separate 10 AWG cables – 5, 8, and 10 foot long.

 

 

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

Leave a Comment :, , , , , , , , , , , , , , , , , more...

Basics of SAE 2 Pin Connector Assembly Polarity

by on Feb.04, 2012, under Polarity

Whenever one contemplates use of SAE 2 Pin connectors, an understanding of, and attention to, “polarity” is vital.  Vital in terms of safety, and avoiding possible damage to components.

For the novice (and those who have forgotten) – “polarity” means identifying the “hot” (+) positive side of the connector vs. the negative (-) side.

When there are leads of different insulation colors, say red and black (or white) – the red insulation by standard indicates “hot” (+) positive.

Understand this is a standard, but one should always test to confirm.  Such a test would entail connecting a voltmeter contacting the end of this red insulated lead at the connector and ground.  If there is a voltage indicated (probably 12 volts), then we have confirmed this is indeed the “hot” (+) positive side.

Obviously, with respect to the (-) negative side, the opposite would be the case.  In accordance with standard, this would be indicated by an insulation color other than red – usually black, or white.

Understand that there are times when a color other than red is used to indicate “hot” (+) positive.  For example, if there are several “hot” (+) positive wires (such as in the case of car stereo wiring, i.e., radio power, and keep alive power for memory) a color like yellow might be a “hot” (+) positve wire.

Another application in which there will be multiple “hot” (+) positive wires would be in a trailer light wiring harness and at the vehicle’s disconnect plug.  Even for simple trailer light wiring systems, there may be three “hot” wires – each for various lights (running lights, turn signals, brakes).  Of course there will be a ground (usually black) shared by each of these individual circuits.  In fact, the metal trailer frame is the ground for individual lights in many cases.

While on the subject of trailer lights, it should be noted that this an application in which the SAE 2 Pin connector can be found.  In fact, it is often called a “2 pole flat trailer connector”.  12″ red and white extensions with these connectors can be readily found in the trailer hitch (trailer lights, wiring and connectors) area of your local discount automotive store – most certainly Hopkin’s products.  These are great, certainly filling the bill in many other light applications.  “Light” meaning low current applications, since the wiring is generally 16 or 18 AWG.

These extensions are true “extensions”, i.e., properly connected, you end up with the polarity you started with… at the far end of the extension.  …if the red “hot” (+) positive wire is leading to the female side of the SAE 2 Pin you want to extend 12″… upon coupling the end of one of these 12″ extensions with the red wire leading to the exposed male pin…  the opposite end will have the red wire of the 12″ extension leading to the female side of the SAE 2 Pin at the other end.

Your email is welcome at:  sae2pinray@sae2pin.com

We invite you to visit our www.bohemianbiker.com  for additional information – you’ll find a blog format there too!

Our products are available through our e-commerce website at:  www.solarcapitalist.com  

Solar Capitalist LLC is our sister company handling products such as those discussed above, as well as, Deltran’s line of  Battery Tenders, and Global’s SUNLINQ line Portable Solar Chargers.

Capitalize on the Sun’s Energy !

 

 

 

Leave a Comment :, , , , , , , , , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...